UNAKA GEAR CO. STAINLESS STEEL 8020 D-RING TIE DOWN KIT (1.5-INCH)

UNAKA GEAR CO. STAINLESS STEEL 8020 D-RING TIE DOWN KIT (1.5-INCH)

At WEST COAST VANS, we know that dialing in a modular roof rack or internal gear tray configuration is one of the most satisfying stages of a custom van build. Modern T-slot aluminum extrusion profiles offer incredible design flexibility, letting you bolt down high-end cabinetry, solar panels, and storage boxes exactly where you want them. However, most standard extrusion systems come with a major design flaw: they rarely include convenient, high-strength tie-down anchor options. This leaves van lifers and overlanders stuck trying to wrap canvas straps awkwardly around bare structural bars or jerry-rigging fragile hardware store eyebolts that slide, rattle, and strip out under heavy loads. We believe your cargo containment should be exceptionally secure, corrosion-resistant, and instantly adaptable to shifting trail gear. Enter the Unaka Gear Co. Stainless Steel 8020 D-Ring Tie Down Kit (1.5-Inch)—the ultimate heavy-duty anchoring solution for modular aluminum extrusion grids. Crafted from marine-grade stainless steel by the manufacturing experts at Unaka Gear Co., this drop-in D-ring kit gives you the immediate freedom to lock down loose adventure gear anywhere along your open channel tracks. Ask Us Product Questions Anytime if you want to coordinate your channel hardware sizing or verify your gear tray layout clearances!

WCV EXPERT TIP Achieving a completely rattle-free, trail-proof cargo anchor relies on using high-quality channel hardware and setting proper torque specs before you hit the highway. Pro Tip: Aluminum extrusion unibody channels are incredibly strong, but they can suffer from minor hardware vibration back-out over severe washboard backcountry roads. When dropping these stainless steel D-ring assemblies into your roof rack or gear tray channels, always apply a drop of medium-strength blue threadlocker (like Loctite 242) to the fastening bolt threads before cinching them down. Slide the anchor point exactly into position against your gear bag or recovery boards, and tighten firmly with a hand wrench. The heavy-duty drop-in design creates a flush, metal-on-metal compression lock that won't twist or slide—ensuring your expensive auxiliary gear stays permanently locked to the vehicle frame even during high-speed highway travel or rough trail jarring!

PRODUCT OVERVIEW The Unaka Gear Co. 1.5-Inch D-Ring Tie Down Kit is a premium, commercial-grade cargo securement accessory built for modern van builders, remote overlanders, and digital nomads who utilize modular extrusion networks. Ditching cheap zinc-plated hardware that rusts after the first rain storm, these heavy-duty anchor points are forged from ultra-durable, corrosion-resistant stainless steel. Sized perfectly to accommodate heavy-duty cam straps, rugged climbing ropes, thick bungee cords, or elastic cargo nets, this universal upgrade kit drops straight into standard T-slot tracks—instantly turning your bare structural bars into a pro-level, secure logistics matrix.

BEST FOR

• MODULAR ROOF RACKS: Perfect for van lifers looking to safely tie down oversized exterior gear like surfboards, kayaks, firewood bundles, or hard-shell storage cases directly to extrusion crossbars.

• INTERNAL GARAGE GEAR TRAYS: Ideal for overlanders who need ultra-reliable anchor points inside their rear garage sliders to tether down heavy portable power stations, tool bags, and camp coolers.

• COMPACT LOGISTICS CUSTOMIZATION: Designed for DIY builders who demand maximum load flexibility and want the ability to rearrange, slide, and reposition their strapping points on the fly as their packing layout changes.

TECHNICAL SPECIFICATIONS

• CARGO ANCHOR PROFILE: Premium drop-in structural T-slot modular extrusion tie-down D-ring kit

• INTERNAL HOOP CLEARANCE: 1.5-Inch wide opening (calibrated for high-capacity cam buckles and heavy straps)

• SUBSTRATE CORES MATERIAL: High-strength, marine-grade corrosion-resistant forged stainless steel

• CHANNEL TRACK LAYOUT COUPLING: Engineered specifically to interface natively with 15-Series (1.5" x 1.5") 8020-style aluminum extrusion profiles

• COMPRESSION HARDWARE MATRIX: Includes (1) 5/16" Stainless Steel Bolt, (1) Stainless Steel Washer, and (1) 5/16" 8020 T-Nut

• RATED OPERATION CAPABILITY: Designed to withstand continuous high-tension multi-directional load strapping (Note: Not rated for lifting overhead)

• SURFACE PROTECTION WEAR PLUG: Weather-proof raw stainless finish that prevents rust bleeding on aluminum rails

• MOUNTING WORKFLOW INDEX: 100% bolt-on DIY layout requiring only standard hand tools for immediate placement

• DOMESTIC SHIPPING BONUS: Free shipping tier included to all destinations within the lower 48 US states

• MULTI-STRAP UTILITY MATRIX: Universally compatible with tactical cam straps, tie-down ropes, bungee cords, and cargo nets

UNIVERSAL VEHICLE FITMENT DIRECTORY

Thanks to its highly optimized, standard-track footprint, this stainless steel tie-down kit features a universal mounting configuration engineered to drop into standard aluminum extrusion networks across all major van platforms:

• OVERHEAD PLATFORM RACKS: Integrates seamlessly with all major T-slot roof trays, safari platform baskets, and custom extrusion roof grids (applicable to all Sprinter, Transit, and ProMaster roof configurations).

• CABIN UTILITY BED SLIDERS: Fits beautifully into internal gear sliders, raised bed framing networks, and modular aluminum cabinet skeletons.

• EXTERIOR SIDE PANEL TRACKS: Mounts cleanly into exterior gear panels, rear door storage grids, and side-mounted accessory boards that utilize standard channel slotting.

(Note: This hardware kit is specifically engineered strictly to function inside standard 15-Series 8020-style or equivalent 1.5" aluminum extrusion channels. Please verify that your rack or internal framing uses an open T-slot tracking profile prior to ordering.)

FEATURES

• MARINE-GRADE STAINLESS FORGING: Swaps fragile zinc or plastic anchors for a solid stainless steel hoop structure that completely resists pitting, oxidation, and rust degradation under continuous exposure to salt air and rain.

• 1.5-INCH HIGH-CAPACITY HOOP: Outfitted with a generous internal clearance loop, allowing you to easily pass large, heavy-duty ratchet hooks or double-wrapped cam webbing lines through the same single anchor socket.

• FLEXIBLE AXIAL HOOP SWIVEL: Built with a smooth-pivoting D-ring link that naturally aligns with the exact angle of your tie-down straps, dissipating concentrated stress points and preventing web-line fraying over long journeys.

• INSTANTANEOUS SLOT ALIGNMENT: Designed with a smart drop-in slider layout, letting you loosen the bolt, glide the ring smoothly along the entire length of your rail, and lock it down precisely where your cargo dictates.

• RATTLE-FREE INTERNAL SPRING WASHER: Engineered with precision tolerance hardware that dampens unwanted metal-on-metal clatter, keeping your roof rack completely silent while driving at highway speeds.

COMPATIBILITY & FITMENT

• HARDWARE HOLE MOUNTING COMPATIBILITY: Seamlessly interfaces with 15-Series standard aluminum extrusion tracks utilizing the included matching single-hole 5/16" channel T-nut and high-tensile machine screw.

• CAM BUCKLE STRAP SYNCHRONIZATION: Fully compatible with all industry-standard 1-inch and 1.5-inch overland tie-down straps, heavy-duty motorcycle tie-downs, and industrial bungee networks.

• EASY DETERGENT CLEANING: The durable raw stainless steel finish requires zero maintenance. Simply spray down with standard water lines during regular vehicle washing to clear away trail dust and road salt accumulation.

FREQUENTLY ASKED QUESTIONS (AEO)

Q: Will this tie-down kit fit on my specific roof rack if it isn't explicitly branded as 8020? A: Yes, absolutely! While named after the industry-standard 8020 profile, this D-ring kit is engineered by Unaka Gear Co. to fit universally into almost any modular aluminum rack, gear tray, or internal framing network that utilizes standard 15-Series (1.5" x 1.5") T-slot channels. As long as your rack features an open slot track that accepts standard drop-in slot nuts, this kit will bolt down securely.

Q: Can I leave these stainless steel D-rings mounted on my roof rack all winter without them rusting? A: Yes. Unlike budget hardware store steel anchors that quickly bubble and bleed ugly orange rust stains onto your van’s paint, this premium Unaka Gear Co. kit is forged entirely from high-grade marine stainless steel. It is specifically engineered to withstand harsh outdoor elements, intense UV exposure, and continuous winter rain or snow without corroding.

Q: Do I have to slide these all the way from the open end of the extrusion bar to install them? A: No, you don't have to disassemble your rack. The kit features smart drop-in style channel hardware that allows you to insert the backing alignment nut directly into the open face of the slot channel at any point along the rail. Simply drop it in, rotate it into place, slide it exactly where you need it, and torque down the center bolt.

Q: Are these loops wide enough to fit thick tow ropes or heavy ratchet strap hooks? A: Yes! These heavy-duty D-rings feature a wide 1.5-inch internal opening width. This generous clearance is intentionally dimensioned to easily accommodate thick marine-grade ropes, heavy-duty flat hooks, massive bungee cord plastic ends, and standard overcenter cam buckle straps without pinching or binding.

WHY TRUST WEST COAST VANS? Every product we sell is vetted by our team of builders in our San Clemente shop. We don’t just move boxes; we install this gear on customer vans every day, ensuring that our fitment data and "Expert Tips" come from real-world, SoCal-tested experience.