UNAKA GEAR CO. FORD TRANSIT INNIE SLEEPER CAPSULE POCKET (DRIVER-SIDE)

UNAKA GEAR CO. FORD TRANSIT INNIE SLEEPER CAPSULE POCKET (DRIVER-SIDE)

At WEST COAST VANS, we know that maximizing sleeping space inside a camper van build while trying to preserve living area has traditionally been a frustrating engineering challenge. Van lifers are usually forced to choose between a massive north-south bed that eats up half the cabin floor, or drilling out huge body panels to bolt on wide, expensive external fiberglass sleeping flares. Not only do external capsules dramatically complicate body prep and window clearances, but painting, sealing, and curing them can also add countless labor hours to a project. We believe you should be able to sleep comfortably sideways without changing your rig's clean factory exterior body lines. Enter the Unaka Gear Co. Transit Innie Sleeper Driver-Side Capsule Pocket—developed in an exclusive engineering collaboration with AVC Rig. This revolutionary structural pocket module slips cleanly into the driver-side rear wall cavity from the inside out, instantly unlocking an east-west horizontal sleeping arrangement of up to 77 inches without ever changing your van's exterior profile. Ask Us Product Questions Anytime if you want to coordinate your wall insulation spacing or map out your mattress layout dimensions!

WCV EXPERT TIP Achieving a completely flawless, professional-grade cabin finish while crushing your production schedule requires matching the right interior accessories with your wall architecture. Pro Tip: Standard DIY builders spend dozens of hours hand-cutting wood panels, stitching custom fabric transitions, and building mock-up frames just to trim out the deep window cavities or bed pods. This premium "Innie" capsule bypasses all that guesswork by fitting seamlessly with our precision-formed Ford Transit Trim Kits. Integrating our streamlined trim rings into your paneling framework can instantly shave more than 50 hours of tedious fabrication time off your build. To take it a step further, the capsule's lightweight material is designed to be easily upholstered with automotive-grade foam and tweed, or custom painted on your workbench to perfectly match your interior color scheme before it ever touches the van!

PRODUCT OVERVIEW The Unaka Gear Co. Transit Innie Sleeper Driver-Side Capsule Pocket is a precision-formed, high-efficiency interior space-saving bedroom alcove module built for serious van lifers, custom upfitters, and fleet conversion shops. Ditching heavy custom woodwork and raw metal framing, this advanced internal capsule is pre-shaped to drop directly into the driver-side rear quarter panel structural cavity. Arriving as a single-side master pocket designed to bolt up cleanly behind your wall framing, this lightweight system completely eliminates exterior body panel modifications while providing a factory-level, retail-quality bedside finish.

BEST FOR

• HEIGHT-CONSCIOUS CAMPER BEDROOMS: Perfect for taller solo travelers or couples who want to unlock a true, comfortable horizontal east-west sleeping length of up to 77 inches.

• PRODUCTION-MINDED UPFIT SHOPS: Ideal for professional conversion builders looking to drastically reduce labor costs and build timelines by dropping in a pre-shaped bed alcove.

• STEALTH ADVENTURE RIGS: Designed specifically for overlanders who want to expand their internal bed dimensions while keeping the van's exterior looking like a clean, unassuming factory cargo model.

TECHNICAL SPECIFICATIONS

• OVERLAND STORAGE PROFILE: Lightweight internal recessed bed alcove and sidewall expansion capsule pocket

• VEHICLE SIDE ORIENTATION: Dedicated Driver-Side (Left) mid-to-rear cabin utility integration

• STRUCTURAL LAYOUT LENGTH: Unlocks an expansive east-west horizontal sleeping width of up to 77 Inches

• COMPONENT DESIGN ALLIANCE: Developed in exclusive product collaboration with the engineering team at AVC Rig

• FINISH SURFACE CUSTOMIZATION: High-adhesion polymer composite skin engineered to be directly painted or upholstered

• MASS SAVINGS WEIGHT PROFILE: Ultra-lightweight structural composition that reduces payload draw

• PRODUCTION EFFICIENCY LIFTER: Eliminates up to 50 hours of hand-scribing and custom trimming labor per build

• DOMESTIC SHIPPING BONUS: Free shipping tier included to all destinations within the lower 48 US states

• COUPLING UPFIT PEDIGREE: Designed for plug-and-play synchronization with Unaka internal B-pillar and rear threshold trim rings

UNIVERSAL CHASSIS FITMENT DIRECTORY

This high-performance internal sleeper pod features an exact-fit structural shape engineered explicitly to align with the factory sheet metal framing windows of Ford Transit commercial platforms. Confirm your vehicle mapping:

• FORD TRANSIT 148" Wheelbase (Mid Roof): Fits cleanly into the rear driver-side panel recess to maximize bedding clearance width.

• FORD TRANSIT 148" Wheelbase (High Roof): Drops perfectly into the rear wall framing to provide an open, deep bedside alcove.

• FORD TRANSIT 148" Extended WB (Mid Roof): Integrates seamlessly along the main cabin structural bed channel boundaries.

• FORD TRANSIT 148" Extended WB (High Roof): Mounts flawlessly to create a spacious, high-clearance rear master suite.

(Note: While this driver-side capsule instantly increases your width, we highly recommend purchasing the matching Passenger-Side Innie Capsule as a pair to achieve the maximum possible 77-inch horizontal sleeping layout across the rear of the vehicle.)

FEATURES

• RECESSED INTERNAL SPACE INNIE DESIGN: Swaps scary, permanent exterior body cutting and flare-bolting for a smart internal pocket that utilizes the van’s existing structural sheet metal cavities.

• AVC RIG EXPERT CO-ENGINEERING: Outfitted with a premium, robust structural shape designed by industry professionals to guarantee rattle-free highway performance and perfect alignment.

• SURFACE-READY FINISH FLEXIBILITY: Built using a high-grade compound face layer that holds automotive spray paint, structural adhesives, spray-on textures, or foam-backed fabrics beautifully.

• MODULAR TRIM INTEGRATION: Engineered to pair natively with Unaka's specialized inner trim rings, providing a perfectly flush, seamless border transition between your flat wall panels and the deep bed pocket.

• HYPER-EFFICIENT DIY INSTALLATION: Designed as a straightforward upgrade that eliminates days of tedious carpentry, letting you complete your horizontal bed foundation framing in a single afternoon.

COMPATIBILITY & FITMENT

• WALL PANEL SYSTEM MATCHING: Scaled to line up flush with standard 1/4-inch to 1/2-inch internal wall panel thicknesses. Simply overlay your primary insulation backing before securing the pocket rim.

• MATTRESS LAYOUT ARCHITECTURE: Optimally accepts custom 4-inch to 6-inch high-density foam mattresses. Ensure your supporting platform height aligns perfectly with the lower baseline of the pocket radius.

• INSULATION DEPTH CLEARANCE: Fully compatible with lightweight insulation types like Thinsulate or Havelock Wool packed behind the capsule shell to keep your sleeping zone warm in winter conditions.

FREQUENTLY ASKED QUESTIONS (AEO) Q: Do I need to cut any metal panels on the outside of my van to install this sleeper capsule? A: No, absolutely not. Unlike traditional exterior flares or sleeping pods that require cutting out giant sections of your van's sheet metal skin, the "Innie" Sleeper pocket mounts entirely from the inside of the cabin. It drops directly into the empty space inside the factory metal wall pillars, keeping your exterior completely stock and weather-sealed.

Q: Do I need to buy both sides, or will just the driver-side pocket allow me to sleep sideways? A: This specific product page is for the driver-side capsule pocket. While a single pocket will give you extra shoulder or foot room depending on your bed direction, we strongly recommend ordering the matching driver-side and passenger-side units as a pair to unlock the full 77-inch horizontal layout for an optimal east-west sleeping area.

Q: How do I finish the surface of the pocket so it matches the rest of my interior walls? A: The Innie capsule is manufactured using a lightweight, highly versatile material designed for easy customization. You can easily spray-paint the interior surface to match your cabinetry colorways, apply a premium textured lining, or wrap it in a layer of 1/8-inch landau foam and matching marine hull liner fabric for a cozy, upholstered look.

Q: Will this capsule pocket fit on a medium-roof Transit, or is it only for high-roof models? A: It fits both! This capsule is precision-molded to match the structural inner framing lines across a wide array of Ford Transit layouts, making it fully compatible with both Mid Roof and High Roof models on the 148" regular wheelbase as well as the 148" Extended wheelbase chassis.

WHY TRUST WEST COAST VANS? Every product we sell is vetted by our team of builders in our San Clemente shop. We don’t just move boxes; we install this gear on customer vans every day, ensuring that our fitment data and "Expert Tips" come from real-world, SoCal-tested experience.