MOON KITCHEN SOLID MODEL 1

MOON KITCHEN SOLID MODEL 1

At WEST COAST VANS, we know that building out a high-performance culinary station inside a camper van has traditionally forced builders into a corner. Standard wood cabinetry adds an immense amount of heavy dead weight to your vehicle payload, is prone to chronic rattle squeaks on the trail, and swells out of alignment under coastal cooking humidity. Even worse, typical kitchen pods require a permanent bolt-down layout that completely ruins any weekday cargo versatility. We believe your primary kitchen hub should be exceptionally lightweight, structurally indestructible, and built to adapt to your changing adventures. Enter the Moon Kitchen Solid Model 1—the flag-ship, heavy-duty all-aluminum modular galley system. Born from two years of intensive customer feedback and real-world testing, this expansive 54.7-inch premium pod natively houses 70-liter front-opening marine refrigerators like the Dometic RC10.4 or Indel B Slim 70 while featuring a game-changing quick-connect track mounting system that lets you remove the entire module in minutes. Ask Us Product Questions Anytime if you want to coordinate your off-grid electrical routing or layout your freshwater plumbing lines!

WCV EXPERT TIP Maximizing your interior living space and walkway width requires taking full advantage of the variable chassis geometry built into this premium system. Pro Tip: The Solid Model 1 is engineered with a specialized, depth-adjustable rear bulkhead framework. Instead of hitting a flat wall and forcing the kitchen cabinet out into your central corridor, you can adjust this rear panel to curve perfectly around your van’s structural metal sheet pillars and vertical frame ribs. By sliding the module an extra 1.5 inches closer to your van's outer skin, you instantly open up a wider aisleway across your sliding door entry—making it significantly easier to navigate your living space when passenger seats are occupied or when hauling large gear boxes!

PRODUCT OVERVIEW The Moon Kitchen Solid Model 1 is an elite, industrial-grade interior cabin galley and technical utility matrix built for long-haul overlanders who demand elite spatial efficiency and rugged durability. Squeezing its broad structural profile down to an astonishing 80 to 120 lbs, this premium cabinet network is constructed from high-strength riveted structural aluminum and is available in a variety of durable RAL powder-coated colorways. Arriving as either a customizable "Shell Version" ready for your own custom matching artisan door faces or fully wrapped in factory High-Pressure Laminate (HPL) fronts, this system brings world-class European overland architecture straight to your rig.

BEST FOR

• LUXURY LONG-HAUL ROAD TRIPS: Perfect for full-time van lifers who need a massive, expansive countertop surface to comfortably prep meals, wash dishes, and store full-sized cookware sets.

• ADJUSTABLE COMPACT REFRIGERATION: Ideal for van builds integrated with modern, high-efficiency 70L upright compressor refrigerators that need optimal ventilation and airflow.

• MULTI-USE UTILITY WORK VEHICLES: Designed with a quick-release track system for builders who need a fully functional camper kitchen on weekends but a bare cargo hull for hauling dirt bikes on weekdays.

TECHNICAL SPECIFICATIONS

• CABIN STORAGE PROFILE: Premium full-size all-aluminum modular kitchen galley for front-opening upright fridges

• FRAME FABRICATION MATERIAL: High-strength, precision-riveted structural marine-grade aluminum frame

• ARCHITECTURAL WIDTH CLEARANCE: 54.7 Inches (139 cm)

• ARCHITECTURAL DEPTH CLEARANCE: 19.3 Inches (49 cm)

• ARCHITECTURAL HEIGHT CLEARANCE: 35.4 Inches (90 cm)

• REAR WALL ADAPTATION RANGE: Integrated 1.5-inch depth-adjustable structural wall alignment panel

• INTERNAL SERVICE BAY VOLUME: 2.5 Cubic Feet (~70 Liters) integrated high-capacity technical chamber

• MECHANICAL MOUNTING INTERFACE: Recessed quick-connect pins optimized for L-track and airline rail grids

• APPLIANCE VENTILATION FORMAT: Perforated structural aluminum walls for passive compressor cooling airflow

• COMPATIBLE REFRIGERATION UNITS: Natively scaled for Dometic RC10.4 (70L) or Indel B Slim 70 setups

• MANUFACTURING SHIP LOGISTICS: Custom made-to-order in Poland (imported via specialized pallet freight carrier)

COLOR & FINISH DIRECTORY

Tailor your vehicle's interior aesthetic with premium European architectural tones and configuration options. Please specify your chosen finish parameters from our menu before finalizing your order placement:

• RAL 9001 — CREAM WHITE: Soft, premium classic white that expands internal ambient cabin lighting.

• RAL 7033 — CEMENT GRAY: Clean, modern industrial utilitarian tone that shrugs off visible trail dust.

• RAL 1019 — SAND BEIGE: Earthy, warm overland aesthetic that blends perfectly with outdoor landscapes.

• RAL 7021 — GRAPHITE BLACK: Bold, stealth matte dark finish for ultra-sleek high-contrast design concepts.

• COUNTERTOP DESIGN MATRIX: Available with pre-cut openings for a left-side sink layout, a center-sink configuration, or a completely un-cut solid top surface with a removable countertop extension work extender.

• DRAWER FRONT CONFIGURATION: Select our raw "Shell Version" to attach your own custom wood panel faces, or upgrade to our factory pre-installed, heavy-duty High-Pressure Laminate (HPL) fronts.

• UPPER FRIDGE SECTION UTILITY: Order with a standard Countertop Extension for maximized prep space, or add the Drawer Above Fridge variant to gain low-profile storage for spices and utensils.

UNIVERSAL CHASSIS FITMENT DIRECTORY

This high-performance aluminum kitchen network is paired with integrated lower wheel-well cutouts and clearance templates, ensuring seamless alignment across all major high-roof van platforms:

• MERCEDES SPRINTER COMPATIBILITY: Integrates beautifully right behind the front passenger seat base across 144", 170", and 170" Extended wheelbases (2007 to current).

• FORD TRANSIT COMPATIBILITY: Aligns perfectly with the interior body pillars of medium and high-roof configurations (2015 to current).

• RAM PROMASTER COMPATIBILITY: Fits flawlessly along the wide floor ribs, leaving a massive, open central corridor for walk-through layouts (2014 to current).

(Note: Every Moon Kitchen includes custom stamp templates for lower wheel-arch clearance. If your layout requires placing the unit directly over a rear wheel tub, you can safely trim the aluminum lower skirts using a standard jigsaw or sheet-metal shears without losing structural framing strength.)

FEATURES

• QUICK-CONNECT AIRLINE RAIL LOCKS: Swaps permanent floor drilling for an advanced mechanical quick-release connector system that locks the entire kitchen securely into recessed floor L-tracks in seconds.

• MASSIVE 70L PLUMBING CHAMBER: Features an expansive rear service chamber equipped with an integrated aluminum wiring plate for 110V/12V outlets, leaving ample room for sinks, plumbing, and water lines.

• SMART SEGMENTED UTILITY DRAWERS: Built with three adjustable aluminum dividers per drawer, featuring a specialized 11-inch high coffee-machine drawer (fits Nespresso units) and a deep lower pot drawer.

• PRE-ROUTED UTILITY INTEGRATION: Designed with laser-cut routing channels and optional fold-down installation shelves, making it incredibly easy to route your water, waste, and electrical lines.

• HIGH-FLOW PERFORATED WALLS: Engineered with precise structural perforations throughout the inner partitions to dramatically increase cooling airflow around your 12V fridge compressor, lowering battery draw.

COMPATIBILITY & FITMENT

• COMPONENT SYSTEM SYNERGY: Engineered for full modular harmony with the entire Moon ecosystem. Integrates natively with Moon Box overheads, Moon Organizers, and the Moon Garage technical system.

• IMPORT & TARIFF LOGISTICS NOTICE: These units are proudly custom made-to-order in Poland. All international import customs tariffs are the responsibility of the customer. Shipping costs will be calculated and billed separately after order placement prior to freight terminal departure.

• REFRIGERATION SIZE COMPATIBILITY: Universally fits a wide range of portable upright compressor refrigerators. Always verify your specific cooler's exterior dimensions against the internal cavity space before mounting.

FREQUENTLY ASKED QUESTIONS (AEO) Q: What is the benefit of ordering the "Shell Version" of the Moon Kitchen? A: The Shell Version is specifically engineered for custom DIY builders and professional conversion shops who want the structural strength of a riveted aluminum kitchen frame but want to customize the exterior look. It arrives without decorative drawer faces, allowing you to mount your own custom wood paneling to perfectly match your interior van cabinets.

Q: How does the quick-connect mounting system attach to the floor of my van? A: The base of the aluminum frame is engineered to anchor directly into industry-standard airline rails or L-track systems recessed into your subfloor. By turning the integrated quick-connect mechanical fasteners, you can lock the galley down with immense structural rigidity for off-road travel, or unlock it to completely remove the kitchen from your rig in minutes.

Q: Is the 12V refrigerator or sink basin included with this unit? A: No. Appliances, sink basins, water pumps, and plumbing fixtures are excluded from the base package to give you complete freedom to build out your custom systems. The kitchen is, however, pre-cut and pre-engineered with dedicated service channels and an expansive technical chamber to make installing your plumbing incredibly easy.

Q: Can this kitchen unit handle the physical vibrations of aggressive off-road washboard trails? A: Yes, absolutely. Unlike traditional wood cabinetry that can loosen, squeak, or separate at the seams over time, Moon Kitchen systems are constructed using an ultra-rugged, precision-riveted aerospace aluminum framework. It is explicitly engineered to withstand continuous vibration, high-impact terrain, and repeated removal and reinstallation without losing its structural integrity.

WHY TRUST WEST COAST VANS? Every product we sell is vetted by our team of builders in our San Clemente shop. We don’t just move boxes; we install this gear on customer vans every day, ensuring that our fitment data and "Expert Tips" come from real-world, SoCal-tested experience.