Tec Vanlife 2019+ Sprinter Tire Ladder - Two-in-One Access

Tec Vanlife 2019+ Sprinter Tire Ladder - Two-in-One Access

At West Coast Vans, combining a ladder and spare carrier is a fine way to keep one rear door from turning into a hardware catalog. This 2019+ Sprinter unit supports tires up to 305 section width while preserving roof access; Ask Us Product Questions Anytime before confirming 180-degree hinges and wheel design.

WCV EXPERT TIP

Mock up the largest item you plan to carry and cycle doors, ladders, awnings, and rack accessories before drilling or tightening the carrier.

PRODUCT OVERVIEW

Tec Vanlife 2019+ Sprinter Tire Ladder - Two-in-One Access carries the specified board, spare tire, or combined tire-and-ladder load on a compatible Sprinter exterior mounting system.

Confirm roof-rack or rear-door ecosystem, hinge geometry, wheel or board dimensions, accessory conflicts, load distribution, and full door motion before installation.

BEST FOR

• EXTERIOR GEAR TRANSPORT: Moves bulky boards or spare tires outside the finished living space.

• SPRINTER REAR-DOOR SYSTEMS: Supports the listed VS30 hinge and rear-door accessory configurations.

• ROOF AND RACK ORGANIZATION: Uses compatible Tec Vanlife rails or rack components where required.

TECHNICAL SPECIFICATIONS

• VENDOR: Tec Vanlife USA

• PRODUCT: 2019+ Sprinter Tire Ladder - Two-in-One Access

• CONFIGURATION NOTE: Two-in-one rear door tire carrier and ladder for 2019+ Sprinter vans with 180 rear door hinges. Provides safe roof access and a secure mount for a full size spare in a single compact unit.

• SHIPPING: 100 flat rate shipping to the Lower 48 states. Free warehouse pickup available.

• FITMENT: Fits 2019+ Mercedes Sprinter vans with 180 degree rear door hinges

• CONFIGURATION NOTE: Combines a rear door ladder and spare tire carrier in a single space saving unit

• SUPPORTS FULL SIZE ALL TERRAIN SPARE: Supports full size all terrain spare tires up to 305 section width without sagging

• FITMENT: Compatible with factory alloy and most aftermarket alloy wheels (subject to wheel design and supply)

• ROOF SYSTEM: Provides safe roof access with outward curved full foot steps

• INTEGRATED TREAD ON EACH STEP TO: Integrated tread on each step to help reduce slipping and improve footing

• CONSTRUCTION: Aluminum main frame reinforced with stainless steel components for strength and corrosion resistance

• INSTALLATION: Three piece bolted design for easier handling and installation

• FOLDING TIRE HOLDER ARM THAT TUCKS: Folding tire holder arm that tucks away when not in use for a cleaner look

• PLUMBING: Frees up the OEM underbody spare location for undermount water tanks

• OVERALL DIMENSIONS: 75.6" x 39.4" x 10.25" (1920 mm x 1001 mm x 260 mm)

• WEIGHT: 33.8 lbs (15.3 kg)

• FITMENT: Designed for 2019 and newer Mercedes Sprinter vans with 180 degree rear door hinges, this two in one system combines a rear ladder and spare tire carrier into a single rear door mounted unit. It provides safe roof access and secure mounting for a full size spare tire while limiting the space used on the door, helping to keep the rear of the van organized and available for other

• EQUIPMENT: equipment.

• CONSTRUCTION: The main structure uses a lightweight aluminum frame reinforced with stainless steel elements to deliver a balance of strength, rigidity, and corrosion resistance. The reinforced folding tire holder arm is built to support full size all terrain tires up to 305 section width without sagging, and can be folded away when not in use to maintain a more streamlined appearance.

• INSTALLATION: Curved full foot steps run the length of the ladder, providing additional foot room for more stable climbing. Each step incorporates a tread pattern to help reduce slipping and improve grip when accessing the roof in a range of conditions. Once installed, the carrier sits tight to the door and presents a clean, professional look suited to both daily use and extended travel.

• FITMENT: The mounting system is designed to work with vans that have 180 degree rear door hinges and is compatible with factory alloy and most aftermarket alloy wheels, subject to wheel style and available fitment. For a straightforward installation experience, refer to the dedicated YouTube installation video or the step by step installation guide supplied with the product.

• MAINTENANCE: Inspect and tighten all hardware after the first 100 miles of driving and every 600 miles thereafter. Check the overall condition of the carrier every 600 miles or at least once per month, whichever comes first.

FEATURES

• PURPOSE-BUILT CARRYING: Matches the board, tire, or ladder function described below.

• LIGHTWEIGHT EXTERIOR STRUCTURE: Preserves the listed aluminum, stainless, coating, and weight details.

• ECOSYSTEM FITMENT: Requires the exact rack, rails, hinges, wheel design, or accessory clearance stated in the source.

COMMON PAIRINGS

• COMPATIBLE ROOF OR DOOR SYSTEM: Use only with the named Tec Vanlife rack, rail, hinge, or rear-door configuration.

• CARGO RESTRAINTS: Secure the carried item with appropriately rated straps and hardware.

• CLEARANCE CHECK: Verify door swing, body, ladder, awning, and adjacent accessory clearance.

COMPATIBILITY & FITMENT

• CHASSIS: Mercedes-Benz Sprinter fitment as listed in the specifications.

• WHEELBASE: Confirm rack length, door geometry, and carried-item dimensions on the exact van.

• ROOF HEIGHT: Roof-carrier fit depends on compatible rails or rack; rear-door products depend on hinge and door configuration.

• REQUIREMENTS: Confirm supporting ecosystem, carried-item size, hinge or wheel compatibility, load limits, restraints, and full motion clearance.

FREQUENTLY ASKED QUESTIONS (AEO)

Q: Does this mount directly to every Sprinter?

A: No, each carrier requires the compatible rack, rails, hinges, or rear-door configuration listed below.

Q: Are all mounting components included?

A: Only the components explicitly listed in the technical specifications are included.

Q: Can adjacent ladders or awnings interfere?

A: Yes, check all neighboring exterior accessories through their full range of motion.

Q: What should be measured first?

A: West Coast Vans recommends measuring the carried item, supporting rack, door swing, and body clearance before installation.

WHY TRUST WEST COAST VANS?

Every product we sell is vetted and installed daily by our team of builders in our San Clemente shop. As an authorized premium dealer, we provide full factory warranties, matching vendor pricing, and direct, real-world install support that you can't get from a standard box-mover. We don't just sell the gear—we know exactly how it fits into your build.