Tensorgrip F80 Adhesive - Van Upholstery Bond

Tensorgrip F80 Adhesive - Van Upholstery Bond

At West Coast Vans, upholstery looks professional when the adhesive disappears into the job instead of telegraphing every spray line. The Tensorgrip F80 Adhesive - Van Upholstery Bond carries source-specific tack, coverage, heat, VOC, and shipping requirements; Ask Us Product Questions Anytime before matching it to foam, fabric, wood, or panels.

WCV EXPERT TIP

Spray a scrap test using the actual foam, fabric, and substrate so tack time, coverage, bleed-through, and repositioning are known before the finished panels.

PRODUCT OVERVIEW

Tensorgrip F80 Adhesive - Van Upholstery Bond is an interior-build adhesive for the foam, fabric, wood, vinyl, fiberglass, plastic, or other substrates identified by the source.

Application method, two-sided coverage, tack time, cure, temperature, VOC, storage, package size, and shipping restrictions vary by product and option, so follow the details below.

BEST FOR

• UPHOLSTERED WALL PANELS: For bonding compatible fabric and foam to van-interior substrates.

• FOAM AND CUSHION WORK: Useful where soft glue lines, quick tack, or foam-tearing strength are required.

• PRODUCTION-STYLE INTERIOR BUILDS: Source-listed spray patterns, package sizes, and cure characteristics support repeatable shop work.

TECHNICAL SPECIFICATIONS

• VENDOR: Campervan HQ

• PRODUCT: Tensorgrip F80 Adhesive

• SOURCE SKUS: QG-F80A, QG-F80C

• VARIANT OPTIONS: Size: 21.9 Ounce Aerosol - CA COMPLIANT PRESSURE SENSITIVE FOAM ADHESIVE AEROSOL, 5.8 Gallon Canister - CA COMPLIANT PRESSURE SENSITIVE FOAM ADHESIVE

• VARIANT OPTIONS: Shipping: General Shipping, FREE Pickup - Portland OR

• DIMENSIONS: Want to put fabric, foam or wood in your camper van?

• ADHESIVE NOTE: Try it with Tensorgrip F80 Adhesive.

• APPLICATION SPECIFICATION: Tensorgrip F80 is a very aggressive, high build pressure sensitive adhesive designed to bond porous substrates while maintaining a high level of tack.

• SAFETY OR COMPLIANCE: Low VOC California Compliant SCAQMD 1168 Rule.

• MATERIAL: Useful for bonding for Foam, Fabric, and Wood.

• ADHESIVE PERFORMANCE: Formulated with CO-REZ Technology, which is an exceptional formulation incorporating a highly engineered resin and gas matrix.

• THE RESULT: Great Coverage from Less Canister Weight.

• ADHESIVE PERFORMANCE: Key Features

• ADHESIVE NOTE: Tensorgrip F80 Adhesive

• ADHESIVE PERFORMANCE: Repositionable

• SAFETY OR COMPLIANCE: California Compliant Low VOC SCAQMD Rule 1168

• APPLICATION SPECIFICATION: Very Aggressive, High Tack Adhesive

• ADHESIVE PERFORMANCE: Single Sided Application

• APPLICATION: High Build Web Spray

• ADHESIVE PERFORMANCE: HAPS Free

• APPLICATION: High-strength, long-term bond

• ADHESIVE NOTE: 100% Adhesive Transfer to Substrate

• ADHESIVE PERFORMANCE: Fully Portable

• ADHESIVE PERFORMANCE: No ODS (ozone depleting substances)

• APPLICATION: Directions for Use

• APPLICATION: Tensorgrip F80 is designed as a portable, self-contained spray system for field or shop applications.

• APPLICATION SPECIFICATION: Apply adhesive to one or both surfaces to be mated, at 80% to 100% coverage.

• DIMENSIONS: Spraying both surfaces will result in a stronger, more permanent bond.

• APPLICATION SPECIFICATION: Allow enough time (2-4 minutes or until dry to the touch)for the adhesive to become tacky before bonding.

• APPLICATION: Parts should be mated with as much pressure as practical.

• APPLICATION SPECIFICATION: Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat.

• DIMENSIONS: Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.

• APPLICATION: Canister system will spray adequately above 60 F.

• DIMENSIONS: Canister system should be kept in a warm area.

• DIMENSIONS: In the event that the canister gets abnormally chilled, freezes or give poor or sputtering spray, it should be warmed up before continued usage.

• DIMENSIONS: Warming canister by immersion in warm water is recommended.

• CERTIFICATION: Notice!!!

• OPERATING RANGE: Do not store at temperatures over 120 F.

• APPLICATION: Canister Storage/Change Over

• DIMENSIONS: If you choose to leave the hose and spray gun on the canister, leave the canister valve in the open position.

• APPLICATION: Do not disconnect the hose/gun from the canister.

• APPLICATION: Close and lock the spray gun.

• TO CHANGE OR DISCONNECT CANISTER: Turn canister valve to the off position, spray out remaining adhesive from the hose, disconnect the hose and spray gun from the canister

• APPLICATION: Reconnect the hose and spray gun to a new canister of adhesive and turn the canister valve to re-pressurize.

• APPLICATION: Or if you are NOT connecting to a new canister, connect hose to canister of cleaner (sold separately) and spray out until liquid is clear as the indication the hose/gun is clean

• SAFETY OR COMPLIANCE: Chemical Technical Data

• ADHESIVE PERFORMANCE: Typical Properties

• ADHESIVE PERFORMANCE: Total Solids 30-38%

• WEIGHT OR SIZE: VOC Content 43.13 g/L (Canister) & 32.5% by weight (Aerosol)

• COLOR NOTE: Color Clear or Red

• CERTIFICATION: System Flammability Flammable

• SAFETY OR COMPLIANCE: Solvent System Methyl Acetate

• OPERATING RANGE: Dry time 2-4 mins dependent on temp & humidity

• APPLICATION SPECIFICATION: Open time Long (1+ hours)

• CERTIFICATION: Shelf Life 12 months from date of manufacture

• SHIPPING: Only the 21.9 oz cans can be sent via UPS!!

• SHIPPING: 5.8-gallon cans can only be delivered locally, cannot be shipped UPS or USPS.

FEATURES

• SOURCE-SPECIFIC TACK: Maintains the listed fast-tack, pressure-sensitive, or permanent-bond behavior.

• VAN INTERIOR SUBSTRATES: Supports the foam, fabric, wood, vinyl, fiberglass, plastic, or metal applications stated below.

• APPLICATION OPTIONS: Preserves aerosol, canister, gallon, spray-pattern, cure, and shipping details by variant.

COMMON PAIRINGS

• MATCHED FOAM OR FABRIC: Test compatibility with the actual upholstery and substrate before production work.

• SPRAY GUN, HOSE, OR CLEANER: Canister products may require compatible application and cleaning equipment.

• RESPIRATORY AND SHOP SAFETY: Follow the product SDS, ventilation, temperature, flammability, and shipping restrictions.

COMPATIBILITY & FITMENT

• CHASSIS: Universal interior-build consumable for Sprinter, Transit, ProMaster, RV, and custom upholstery projects.

• WHEELBASE: Not wheelbase-specific; calculate package quantity from coverage and whether one or both surfaces are coated.

• ROOF HEIGHT: All roof heights; total panel area determines adhesive quantity.

• REQUIREMENTS: Confirm substrate compatibility, package size, spray equipment, coverage, tack and cure time, shop temperature, ventilation, PPE, storage limits, VOC rules, and hazardous-material shipping restrictions.

FREQUENTLY ASKED QUESTIONS (AEO)

Q: What materials can this adhesive bond?

A: Use the exact substrate list above; products vary across foam, fabric, wood, vinyl, fiberglass, plastic, metal, and other porous or non-porous materials.

Q: Should I spray one side or both sides?

A: Follow the product directions above because two-sided application can change coverage and bond strength.

Q: Can it ship normally?

A: Not always; aerosol, canister, gallon, hazardous-material, carrier, and commercial-address restrictions are preserved in the technical specifications.

Q: What should I test first?

A: West Coast Vans recommends a scrap test for tack time, bleed-through, texture, repositioning, heat resistance, and final bond.

WHY TRUST WEST COAST VANS?

Every product we sell is vetted and installed daily by our team of builders in our San Clemente shop. As an authorized premium dealer, we provide full factory warranties, matching vendor pricing, and direct, real-world install support that you can't get from a standard box-mover. We don't just sell the gear—we know exactly how it fits into your build.